- The OMICRON CP CU1 is a multifunctional coupling unit that, when used with the CPC 100 test system, enables high-precision measurements of line impedance and K-factor in overhead lines and high-voltage cables. Thanks to the use of variable output frequencies, measurements are not affected by power grid interference, providing extremely reproducible results even in noisy environments. The CP CU1 includes an impedance matching transformer that optimizes power transfer from the CPC 100 to the device under test, and to enhance technician safety, it is supplied with a CP GB1 grounding unit capable of diverting currents up to 30 kA when voltage limit values are exceeded. This combination facilitates testing of ground impedance, step and touch voltages, mutual line couplings, and more, with automatic recording of results via the control software.
Frequently Asked Questions
What is the primary function of the CP CU1 when used in conjunction with the CPC 100?
The CP CU1 acts as a coupling unit that allows the CPC 100 to be safely connected to overhead lines and high-voltage cables to measure line impedances, K-factor, ground impedances, step voltages, and touch voltages, significantly expanding the diagnostic capabilities of the test system.
Why aren't measurements taken with the CP CU1 affected by power line frequency interference?
El sistema CPC 100 + CP CU1 emplea frecuencias de salida variables para las mediciones, lo que hace que las interferencias de la frecuencia de la red (por ejemplo 50/60 Hz) no influyan en los resultados, permitiendo obtener mediciones extremadamente precisas y reproducibles incluso en ambientes electromagnéticamente ruidosos.
What additional security features does the CP CU1 offer during testing?
To enhance the safety of testing personnel, the CP CU1 is supplied with a CP GB1 grounding unit, which can divert currents of up to 30 kA if a voltage limit is exceeded, ensuring protection in the event of a fault or unexpected conditions during connection to a line or cable.
What electrical parameters can be measured using the CP CU1?
With the CPC 100 + CP CU1 combination, it is possible to measure accurately:
Line Impedances and K-Factor in Overhead Lines or HV Cables
Ground Impedances in Large-Scale Systems
Step and touch voltages for safety assessment
Interconnections between parallel lines or signal cables
What are the typical applications of the CP CU1 in electrical system testing?
The CP CU1 is used for testing substation grounding systems, offline testing of high-voltage cables, evaluating transmission lines, measuring coupling conditions between lines and auxiliary cables, and analyzing critical parameters for protection and network modeling.
Equipment available in:
